View NAR161H-F_8995521.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

nar161h - f features character height : 15.24mm (0.6inches) size numeric display, anode common circuit, black color face, emitting color : red, super b right product ? outer dimension 19 x 12.5 x 12mm ( l x w x h ) ? pb - free soldering compatible ? rohs compliant package product features ? amusement machine, home appliances, oa/fa use, various indicators, etc . standard product specifications recommended applications page : 1 2014.12.25
nar161h - f unit mm weight 2.187g tolerance 0.25 outline dimensions page : 2 internal circuit diagram (anode common) 2014.12.25 the measure of is the root of lead. symbol part name material qty. - led die algainp 8 lamp house resin 1 lead frame pb free solder plating 1 encapsulant epoxy resin -
nar161h - f specifications page : 3 2014.12.25 d d.p.seg. i v ? conditions a g seg. dominant wavelength spectral line half width nm nm item typ. - 31.9 luminous intensity i r i f = 10ma v f i f = 10ma max. symbol forward voltage min. reverse current 100 1.6 units electro and optical characteristics 2.5 7.2 15 - above the table of luminous intensity (i v ) values and dominant wavelength (d) values are the setup value of the selection machine note i f = 10ma - - a/seg. - 630 - mcd/seg. v r = 5v - v/seg. mcd/seg. i f = 10ma 1.5 - 6.8 i f = 10ma - item symbol maximum ratings units mw/seg. storage temperature t stg operating temperature v i f 0.20 ma/ continuous forward current absolute maximum ratings i f 15 ma/seg. i frm 1.33 ma/ 37 repetitive peak forward current f=1khz, duty Q 1/5 black algainp red product overview face color power dissipation p d ifrmderate linearly from ta=25 f=1khz, duty Q 1/5 die material emitting color i frm 100 t opr reverse voltage v r 5 -30 +85 -30 +85 resin color (emitting area) red ma/seg. i f derate linearly from ta=25
nar161h - f 0.0 0.2 0.4 0.6 0.8 1.0 1.2 380 430 480 530 580 630 680 730 780 wavelength vs. relative intensity conditions: ta = 25 , i f =10ma wavelength : (nm ) relative intensity technical data page : 4 2014.12.25
nar161h - f 0.0 1.0 2.0 0 5 10 15 20 25 0.0 0.5 1.0 1.5 2.0 -40 -20 0 20 40 60 80 100 1.0 1.5 2.0 2.5 3.0 -40 -20 0 20 40 60 80 100 0 5 10 15 20 25 30 35 40 45 50 55 1.4 1.6 1.8 2.0 2.2 2.4 2.6 forward current vs. relative intensity condition : ta = 25 forward current i f (ma) ambient temperature vs. relative intensity condition : i f = 10ma ambient temperature: ta( ) forward voltage vs. forward current condition : ta = 25 forward voltage v f (v) forward current i f (ma) relative intensity relative intensity technical data ambient temperature vs. forward voltage condition : i f = 10ma ambient temperature: ta( ) forward voltage v f (v) page : 5 2014.12.25
nar161h - f 0 20 40 60 -30 -10 10 30 50 70 90 ambient temperature vs. power dissipation ambient temperature : ta( ) 0 20 40 60 80 100 -30 -10 10 30 50 70 90 duty=20% dc ambient temperature vs. maximum forward current ambient temperature : ta( ) 620 625 630 635 640 -40 -20 0 20 40 60 80 100 620 625 630 635 640 0 10 20 30 40 50 60 forward current vs. dominant wavelength forward current i f (ma ) ambient temperature vs. dominant wavelength condition : i f = 10ma ambient temperature : ta( ) power dissipation : p d (mw) technical data dominant wavelength : d (nm) page : 6 maximum forward current i f max (m a ) condition ta=25 dominant wavelength : d (nm) 2014.12.25
nar161h - f soldering conditions page : 7 1.soldering precaution 1) avoid dipping the case and mold resin in to the soldering bath. 2) the temperature of the case and the mold resin must not become 100 deg. or more . moreover, please make it within 120 sec when you add the temperature that exceeds the storage temperature of the product at even 100 deg. or less . 3) the case and the sealing resin are soft, and consider it enough, please solder and after it solders so that neither the shock nor the vibration may join before the normal temperature returns . 2.recommended soldering condition 1) soldering iron ? temperature at tip of iron 400 deg. max. ? soldering time 3 sec max. ? soldering position ( 1) : it is a remote lead part from the case bottoms except the flange by 2mm or more . ? the frequency of the dip soldering is up to 2 times. ? please do the following manual soldering after it cools to the normal temperature after the manual soldering . 1 soldering position flange case bottom double side through - hole pcb soldering position single side pcb 2) dip soldering ? pre - heating 60 sec max. at 100 deg. max. ( mold resin temperature. ? dip soldering bath - temperature non - flow soldering bath 265 deg. max. flow soldering bath 255 deg. max ? dipping time 5 sec max. ? soldering position it is a remote lead part from the case bottoms except the flange by 2mm or more . ? the frequency of the dip soldering is up to 2 times. this means 2 times of dip ? or 1 time of dip + 1 time of repair in solder iron ? . ? please do the operating dip after it cools to the normal temperature after the dip. 3) reflow soldering not recommend 2 mold resin the resin filled from the other side of the case is indicated. 2014.12.25
nar161h - f handling precaution page : 8 2014.12.25 70% rh max. adaptability notes) 2) 3) when the supersonic wave is used together, the bonding wire in the mold resin might resonate, and the reliability be affected. therefore, please use it after getting there is no problem in prior in case of your mass production condition in the confirmatio ? as for cleaning by the pure water, it is recommended by the condition of 2). ? the time of the dip is the normal temperature within at 3 min . acetone pure water 1) when cleaning it, i will recommend the following. provided that, it wishes care so as not to adhere about the case because alcohols might violate stamping. moreover, please refrain a wipe of the case by using alcohols and sufficing. the acetone and thinn avoid cleaning the entire led numeric display. (only the lead part is assumed to be acceptable. ) please execute forced drying immediately after cleaning after using the pure water (not acceptable city water) and remove the moisture that adheres to the lead completely when the water cleaning is executed. 3.cleaning solvent isopropyl alcohol etyl alcohol thinner warrant period 6months there is a possibility that the lead part where the solder processing was given oxidizes when the above- mentioned period is exceeded, the solderability might deteriorate when the lead part will oxidize, and give care t there is no problem as a product specification because this part is a part that cannot be used as a soldering position in the product specification, and the sulfuration doesn't influence the characteristic though the lead root where the solder processing 4.warrant period storage state +5 +30 deg, 70 p.c. rh max. solvent adaptability ethyl alcohol isopropyl alcohol pure water acetone thinner
nar161h - f handling precaution other precautions 1. stanley led lamps have semiconductor characteristics and are designed to ensure high reliability. however, the performance may vary depending on usage conditions 2. absolute maximum ratings are set to prevent led lamps from failing due to excess stress ( temperature , current, voltage, etc .). usage conditions must not exceed the ratings for a moment, nor do reach one item of absolute maximum ratings simultaneously . 3. in order to ensure high reliability from led lamps, variable factors that arise in actual usage conditions should be taken into account for designing. ( derating of typ., max forward voltage, etc.) 4. please insert protective resistors into the circuit in order to stabilize led operation and to prevent the device from igniting due to excess current . 5. the products are designed to operate without failure in recommended usage conditions. however, please take the necessary precautions to prevent fire, injury, and other damages should any malfunction or failure arise . 6. the products are manufactured to be used for ordinary electronic equipment. please contact our sales staff beforehand when exceptional quality and reliability are required, and the failure or malfunction of the products might directly jeopardize life or health ( such as for airplanes, aerospace, transport equipment, medical applications, nuclear reactor control systems and so on). 7. when there is a process of supersonic wave welding etc. after mounting the product, there is a possibility of affecting on the reliability of junction part in package (junction part of die bonding and wire bonding). please make sure there is no problem before using . 8. the performance characteristic of led numeric display is a value of the guarantee under the measurement condition of the description in the specification. there is a possibility that operation becomes unstable when operating in the low current region (3ma and below). therefore, after the product selection and the limitation resistance setting, etc. are done, the use of 3ma or more is recommended . 9. please design the layout of the pcb after it is considered that the adjoining each other led numeric display doesn't meddle when plurality of is used on the identical pcb. especially , it becomes easy for the pcb to curve easily, and for the product to meddle mutually due to the curve in the dip. the stress hangs in the lead when the product meddles mutually, and the damage of internal might be caused. 10. avoid excessive stress to lead frames when mounting . for example , please do not do the dip where the case is fixed with the dip and the treatment device in the state to assemble the led numeric display to the pcb for which lead pitch is not suitable. 11. please do the mounting work at the normal temperature. 12. the clinch of the lead when mounting is not recommended . 13. in regards to a matter of consultation, which is not on these specifications, an exchange is performed after deliberations . 14. please verify in a real condition, and use it after judging the thing in which trouble is not found in your company when there are differences in the presentation condition on this specification and the condition in the real use. 15. the formal specification sheets shall be valid only by exchange of documents signed by both parties. page : 9 2014.12.25
nar161h - f packaging specifications page : 10 1. internal packaging 100pcs product are arranged on tray. (100pcs / 1 tray) mirror mat shall be placed on the tray for surface protection of product. maximum 10 trays are stacked. empty tray is paved at the bottom of 10 trays. cardboard sheets are placed on the top and the bottom side. nylon tape is used to seal at 2 places. 2.inner carton box packaging 1 or 2 above internal packing(s) shall be placed into inner carton box . the size of inner carton box is different depending on the shipping qty.(number of stacked tray) product label shall be stuck on the top side of inner carton box. 3.outer carton box packaging inner carton box shall be placed into outer carton box . the size of outer carton box is different depending on the shipping qty. and number of inner carton box. product label shall be stuck on the top side of inner carton box . 2014.12.25
nar161h - f lot number notational system page : 11 2014.12.25 2 digits cristian era (one digit of end) manufactured month (jan. sep. 1 9 oct. x, nov. y, dec. z - - 2 digits production number (2 degits) manufactured da (01 31) - 1 digit - 1 digit
nar161h - f correspondence to rohs ? elv instruction this product is in compliance with rohs ? elv. prohibition substance and it's criteria value of rohs ? elv are as follows. ? rohs instruction refer to following (1) (6). ? elv instruction . refer to following (1) (4). substance group name criteria value (1) lead and its compounds 1,000ppm max (2) cadmium and its compounds 100ppm max (3) mercury and its compounds 1,000ppm max (4) hexavalent chromium 1,000ppm max (5) pbb 1,000ppm max (6) pbde 1,000ppm max page : 12 2014.12.25
nar161h - f reliability testing result failure criteria page : 13 2014.12.25 items symbols conditions failure criteria luminous intensity i v 10ma testing min. value spec. min. value x 0.5 forward voltage v f 10ma testing max. value R spec. max. value x 1.2 reverse current i r 5v testing max. value R spec. max. value x 2.5 cosmetic appearance - - occurrence of notable decoloration, deformation and cracking duration failure 1,000h 0/3 1,000h 0/3 1,000h 0/3 1,000h 0/3 5 cycles 0/3 2 times 0/3 1,000h 0/3 dynamic current drive ta=25 ,i f =max ma ? 1ms,1/5duty thermal shock -30 85 (15min. of each) resistance to dip soldering pb free condition (265 ? 5s) low temperature operating ta=-30 ,i f =15ma high temperature operating ta=85 ,i f =3ma high humidity operating ta=60 ,90%,i f =8ma room temperature operating ta=25 ,i f =15ma test item conditions
nar161h - f special notice to customers using the products and technical information shown in this data sheet 1) the technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. it does not constitute the warranting of industrial property nor the granting of any license. 2) for the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. therefore it is recommended that the most updated specifications be used in your design. 3) when using the products described in the data sheets, please adhere to the maximum ratings for perating voltage, heat dissipation characteristics, and other precautions for use. we are not responsible for any damage which may occur if these specifications are exceeded. 4) the products that have been described to this catalog are manufactured so that they will be used for the electrical instrument of the benchmark (oa equipment, telecommunications equipment, av machine , home appliance and measuring instrument). the application of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might influence the life or the human body. please consult us beforehand if you plan to use our product for the usages of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. except oa equipment, telecommunications equipment , av machine , home appliance and measuring instrument. 5) in order to export the products or technologies described in this data sheet which are under the foreign exchange and foreign trade control law, it is necessary to first obtain an export permit from the japanese government. 6) no part of this data sheet may be reprinted or reproduced without prior written permission from stanley electric co., ltd. 7) the most updated edition of this data sheet can be obtained from the address below: http:// www.stanley - components.com/en/ page : 14 2014.12.25

▲Up To Search▲

Price & Availability of NAR161H-F

	To Download NAR161H-F Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .